 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 15~40W AC-DC Single Output Desktop Features : 3 pole AC inlet IEC320-C14 Class power ( with earth pin) Full output 3~48V safety approval P40A series Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT PSU40A-0 PSU40A-1 PSU40A-1-1 PSU40A-2 Note.2 3.3V TUV Rheinland Product Safety geprUfre Sicherheit P40A-0P2J P40A-1P2J P40A-1-1P2J P40A-2P2J P40A-3P2J P40A-4P2J P40A-5P2J P40A-6P2J P40A-7P2J P40A-8P2J PSU40A-3 PSU40A-4 PSU40A-5 PSU40A-6 PSU40A-7 PSU40A-8 12V 3.33A 0 ~ 3.33A 40W 80mVp-p 11~13V 4.0% 1.0% 3.0% 15V 2.66A 0 ~ 2.66A 40W 100mVp-p 13~16V 3.0% 1.0% 2.0% 18V 2.22A 0 ~ 2.22A 40W 100mVp-p 16~21V 3.0% 1.0% 2.0% 24V 1.66A 0 ~ 1.66A 40W 150mVp-p 21~27V 3.0% 1.0% 2.0% 28V 1.42A 0 ~ 1.42A 40W 150mVp-p 27~33V 3.0% 1.0% 2.0% 48V 0.83A 0 ~ 0.83A 40W 150mVp-p 33~48V 2.0% 1.0% 1.0% 5V 5A 0 ~ 5A 25W 50mVp-p 5~6V 7.5V 4A 0 ~ 4A 30W 80mVp-p 6~8V 9V 3.88A 0 ~3.88A 35W 80mVp-p 8~11V 5.0% 1.0% 4.0% 4.54A 0 ~ 4.54A 15W 3~5V RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE ADJ. RANGE Fixed output by internal VR VOLTAGE TOLERANCE Note.4 10% 6.0% 5.0% LINE REGULATION LOAD REGULATION Note.5 Note.6 1.0% 8.0% 90 ~ 264VAC 47 ~ 63Hz 65% 1A / 100VAC 60A / 230VAC 1.0% 5.0% 1.0% 5.0% SETUP, RISE, HOLD UP TIME 200ms, 50ms, 16ms at full load VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING PLUG CABLE 135 ~ 370VDC 70% 72% 74% 75% 78% 78% 80% 80% 82% 0.75mA / 240VAC 150 ~ 450% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover IC1Tj135 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +40 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / ( 0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, CSA22.2, EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 Compliance to EN55022(CISPR22) class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,11,ENV50204, light industry level, criteria A 500khrs min. MIL-HDBK-217F (25 108*67*36mm (L*W*H) 0.3kg; 54pcs/ 20kg / CARTON Standard type P2J: 2.1 * 5.5 * 11mm, center positive for stock ; Other type available by customer requested Standard type see page2 ; Other type available by customer requested ) / 70% RH CONNECTOR NOTE 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P40A-SPEC 2008-05-08 15~40W AC-DC Single Output Desktop Mechanical Specification P U S P -4202A sseerrii e ss 5e Unit:mm 16AWG SPT-1 1230 +100/-0 for 3.3V, 5V 16AWG SPT-1 1830 +100/-0 for 7.5V 18AWG SPT-1 1830 +100/-0 for others 36 36 106 11 SWITCHING ADAPTOR 67 POWER LED 108 ID 2.1 x OD 5.5 69.9 18 Plug Assignment Standard plug: P2J (option) 3 33.5 45 42 67 P2J P/N CENTER OUTPUT + R1 NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 LOAD (%) LOAD (%) 80 60 60 0 10 20 30 40 0 50 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:P40A-SPEC 2008-05-08 |
Price & Availability of P40A-8P2J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |